INSTRUCTIONS
Required material
Pcs. Description Material Dimensions
4 wooden beams 2000 mm
1 bottle of walnut wood stain
1 can of cream white paint
1 Leatherette 1.0 * 1.4
1 multiplex board
1 threaded rod
Tools Needed
Cordless Screwdrivers
Cordless Circular Saw
Table Saw
Random Orbit Sander
Miter saw
Stapler
Plan
Cut wooden beams
4 wooden beams (5,8cm * 7,8cm) with 200cm total length
cut in 45 ° miter at 45 cm.
Thus, a seat height of 45 cm results on the beam
plus seat pads
Connect wooden beams with 45 ° pieces
For the 45 ° beamed pieces with the remaining
Connecting bar I used here
first Lamellos and glued everything
Grinding bar
Here were the bars with the PEX 270
ground outdoors
Undercover Jig
As additional support for the bars
Im still with the Undercover Jig
bolted parts
Pickling bar
The bars I then with Mordant
Dark walnut painted and allow to dry
Making cube
As a 2nd pillar of the Bank, I have a
Cube made while I cut from a larger
Plate with the PKS 18 LI, the parts made,
I cut later with the PTS 10
The height of the cube is 37,2cm
The width and depth of 32,2cm
Lamello insert
For the cube I wanted no visible. Make connections, ie see screws.
Therefore, I decided to provide you with everything Lamellos
Glue cube
Here all the parts have been glued together and then ground.
Paint cube
Here the cube in cream white was lacquered
Screw cube with beams
Here I have the cube with the bar screwed bottom
Fix distance blocks
First 3 pieces with the cut-off saw cut then painted and secured.
After the glue I used the auger a hole drilled through all parts and a threaded rod
appropriate.
Customize leatherette upholstery
First, I have on the back of the leather
the pattern shown.
Then cut, tacked the corners before sewing
sewn and stapled with the PTk the reference to the seat cushion
Completely project
